Home » Blog » Data Recovery » How to Get Windows to Recognize New SSD – Want to Know?

How to Get Windows to Recognize New SSD – Want to Know?

author
Published By Deepa Pandey
Ashwani Tiwari
Approved By Ashwani Tiwari
Published On November 24th, 2023
Reading Time 5 Minutes Reading
Category Data Recovery

SSD devices are gradually replacing old and traditional HDDs, and the majority of new PCs now utilize this new form of drive. These, however, are not without flaws. One difficulty you may have while utilizing these drives is that your new SSD is not recognize by your computer. In this situation, users seek answers on how to get Windows to recognize the new SSD drive.

If this occurs, you will discover that your recently purchased SSD cannot be accessible since it is not recognized anywhere. It does not appear in File Explorer, Command Prompt, or Disk Management.

So, to resolve this user query, we have come up with various solutions for different scenarios. Check which method will work for you. If none of the workouts are for you, then we recommend you go for the recovery utility solution discussed right here to recover the data saved on the SSD drive.

Quick NavigationsHide

Remove Other Drives from Your Computer

If your SSD does not appear in BIOS or on the primary operating system interface, the first thing you should do is remove all other devices from your computer. It will prevent your computer from becoming confused about which drive to mount in File Explorer.

If there is a problem with any of the other disks attached to your computer, this should fix it as well. You just need to do that while your machine is experiencing the SSD issue, and after it is resolved, you can always reattach your other disks and access them on your computer.

Also read: How to Enable TRIM on Windows

Check to See Whether the SSD Appears in the BIOS

Sometimes your operating system has problems, which might explain why your new SSD isn’t showing up on your computer. Using the BIOS menu is one technique to see if your system truly detects your disk.

You may check your computer’s BIOS to verify whether it recognizes your SSD disk.

  • Power off your system.
  • Restart your computer while holding down the F8 key on your keyboard. If you are unsure which key will take you to BIOS, contact the manufacturer of your machine.
  • If your computer identifies your SSD, you’ll see it displayed on the screen.
  • It basically informs you that there is a problem with your operating system. One solution is to reinstall the complete system on your machine.

Format Your Solid State Drive

To learn how to get PC to recognize new SSD, this is our fourth solution. If you’re trying to connect a new disk to your computer, ensure it’s correctly formatted before it appears in applications like File Explorer. To format your disk, utilize your computer’s built-in Disk Management utility.

  1. Hold down the Windows + R keys at the same time, then type diskmgmt.msc and press Enter.
  2. Make sure Disk Management is open on your screen. Locate your SSD drive in the list, right-click it, and choose Format.
  3. Format the drive in the NTFS file format.
  4. Remove the hard disk from your computer.
  5. Reconnect the drive to your computer.

Note: Once you format the drive, maybe the SSD drive will be recognized by the system. But the data cannot be accessed using the Windows platform. So you can use the below-mentioned trusted recovery solution that can be used to recover formatted SSD drive data too.

Restore Formatted Data from SSD With Third-Party Solution

SSD Recovery Tool is the direct solution to fix this issue. This solution is an instant remedy to restore formatted data.

Download Now Purchase Now

It has the capability to recover deleted data from SSD drive. You simply need to download the demo version of the program and follow the below-shown steps in the same way.

Also read this: How Do I Format An Unallocated SSD?

 Working Steps of the Application

  • Download and launch the utility on your Windows OS system.
  • Click on Refresh View; it will show all the drives that are attached to or connected to your system.

attached or connected with system

  • Now your system will recognize the SDD drive on the application panel.
  • Click on the Formatted Scan button to formatted SSD.

Formatted Scan button

  • Let the scanning process complete you can preview your data in the application panel.

preview your data

  • Lastly click on the Save button, to start the exporting of recovered data. 

save data

In this way, your SDD drive was recognized by the system and you also saved all the data from it without any data loss.

Conclusion

It’s a little disheartening to realize that your computer doesn’t detect your SSD disk. This is the reason users seek answers on how to get Windows to recognize new SSD. However, as explained above, there are solutions to resolve the issue and we hope they will assist you in getting your ride to appear on your system.